900-D-35-17-1 - BarcodeFactory 3.5" x 1.4375" Pinfeed EDP Label

See Our Holiday Hours

BarcodeFactory 3.5" x 1.4375" Pinfeed EDP Label 900-D-35-17-1
BarcodeFactory 3.5" x 1.4375" Pinfeed EDP Label 900-D-35-17-1
BarcodeFactory 3.5" x 1.4375" Pinfeed EDP Label

BarcodeFactory 3.5" x 1.4375" Pinfeed EDP Label

SKU: 900-D-35-17-1
|
Weight: 8 lbs.

Print Technology Dot Matrix
Material Type Paper Labels
Width (inches) 3.50 inch
Length (inches) 1.4375 inch
Core Size Fanfold
Format Type Fanfold Pinfeed
Adhesive Type Permanent
Labels Across 1 across
Perforation Perforated
Style Blank Stock Labels
Color White
Order Quantity Per Case
Color Sheen Matte
Stack Per Case 1
Labels Per Stack 5000
Cost Per Label $0.00723

Product Highlights

Barcodefactory 3 1/2 inch x 1 7/16 inch Pinfeed EDP Label, Fanfolded, N/a Repeat Across, 1 1/2 inch Repeat Down, 1 Labels Across, 4 1/4 inch Carrier Width, 6 inch Horizontal Perforated, No Vertical Perforated, 5000 Labels per Case, EDP Smudgeproof, Permanent Adhesive, Priced per Case

BarcodeFactory Pinfeed EDP Labels

We offer high quality, custom pinfeed labels to our customers for use in impact and dot matrix printers. Many people look at custom pinfeed labels and think of them as an old form of printing and dismiss them as legacy. The truth is, these labels are actually still quite useful in a lot of different industries. Because there is a “pin hole” feed system, these labels don’t jam and can be relied on to print in the same place every time. Dot matrix printers are cheap and easily available in the market, and the printing costs are the lowest as compared to other printers. The combination of reliability and price is just part of the reason people have used custom pinfeed labels for so many years.

Our custom pinfeed labels are run through printers as mentioned above, so they will not require varnish or lamination. In this case, putting a protective coating on the labels would prevent the absorption of the ink into the labels.

Printing on EDP (electronic data processing) labelstock is the standard for custom pinfeed labels. EDP paper was designed to accept dot matrix or impact printers, which are printers that work by creating direct contact between ink ribbon and paper using mechanical moving parts.

These labels must perform flawlessly; We understand just how critical this is. Anything less can result in substantial delays and financial losses. Our strict quality standards ensure consistent, trouble-free performance.

Let us know what type of packaging your custom pinfeed labels will be applied to and the environment they will be applied in. You shouldn’t have to worry about whether your labels will hold up on your product.

$36.14
Quantity Discounts
2+
Contact