$134.99
Aruba 277 Access Point
Data Transfer Rate | 1.3Gbps |
MIMO | 3x3:2 |
Power | PoE AC |
Radio Band | Dual |
Wireless Type | 802.11 a/b/g/n/ac |
Environment | Indoor/Outdoor |
Product Highlights
Aruba 277, 2.40 GHz 5 GHz, 802.11ac, 1.3 Gbit/s, 3 x Antenna, MIMO
Aruba 270 Series Access Point
Innovative and aesthetically-designed, our 270-series outdoor APs deliver fast and reliable 802.11ac Wi-Fi performance under any weather conditions.
The three-stream 270 series also enables 802.11n mobile devices to operate up to three-times faster at the same distance from the AP.
Purpose-built for the harshest outdoor environments, 270-series APs can withstand extreme temperatures, persistent moisture and precipitation, and are fully sealed to keep out airborne contaminants.
Models
AP-275 and IAP-275
- 2.4-GHz (600 Mbps max) and 5-GHz (1.3 Gbps max) radios, each with 3×3 MIMO and three integrated omni-directional antennas
AP-274 and IAP-274
- 2.4-GHz (600 Mbps max) and 5-GHz (1.3 Gbps max) radios, each with 3×3 MIMO and three external antenna connectors
AP-277 and IAP-277
- 2.4-GHz and 5-GHz radios, each with 3x3 MIMO and three integrated 80° H x 80° V beamwidth directional antennas
Wireless Radio Specifications
AP type: Outdoor, dual radio, 5-GHz 802.11ac and 2.4-GHz 802.11n
In addition to 802.11n data rates, the 2.4-GHz radio supports 802.11ac data rates using 256-QAM modulation. This gives TurboQAM-enabled clients a 33% boost above the maximum supported data rate to deliver up to 600 Mbps.
3×3 MIMO with three spatial streams and up to 1.3 Gbps wireless data rate
Supported frequency bands (country-specific restrictions apply):
- 2.4000 GHz to 2.4835 GHz
- 5.150 GHz to 5.250 GHz
- 5.250 GHz to 5.350 GHz
- 5.470 GHz to 5.725 GHz
- 5.725 GHz to 5.875 GHz
Available channels: Dependent upon configured regulatory domain
Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
Supported radio technologies:
- 802.11b: Direct-sequence spread-spectrum (DSSS)
- 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
- 802.11n/ac: 3×3 MIMO with up to three spatial streams
Supported modulation types:
- 802.11b: BPSK, QPSK, CCK
- 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM (with TurboQAM clients)
- 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
Transmit power: Configurable in increments of 0.5 dBm
Maximum (aggregate, conducted total) transmit power (limited) by local regulatory requirements):
- 2.4-GHz band: +28 dBm (23 dBm per chain)
- 5-GHz bands: +28 dBm (23 dBm per chain)
Supported data rates (Mbps):
- 802.11b: 1, 2, 5.5, 11
- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
- 802.11n: 6.5 to 450 (MCS0 to MCS23, 1 to 3 spatial streams)
- 802.11ac: 6.5 to 1,300 (MCS0 to MCS9, 1 to 3 spatial streams
-
Quantity Discounts2+Contact