CAB A4+M
A4+M - particularly for very small labels and slim continuous materials
The label printer for specific materials with centered material guide
All materials that are winded on rolls or reels can be marked. Especially very small and slim continuous materials such as pressed tubes.
- No adjustment of print head for different widths of material
- Print rollers for narrow and slim materials
- Operation and control are compatible with the A+ series.
| 1.5 Label printer |
A4+M |
| Printable resolution dpi |
300 |
600 |
| Print width up to mm |
105.6 |
105.6 |
| Print speed up to mm/s |
125 |
100 |
Accessories for label printer A4+M
Cutter
Used to cut paper labels, self-adhesive labels, cardboard, textile or synthetic materials as well as heat shrink tubes.
Perforation cutter
Enables the perforation of the material for later manual separation.
Stacker with cutter
Printed materials are cut and stacked. The print job is stopped as soon as the maximum stack height is reached. Even stiff or curved materials may be processed. We recommend to have your material tested at our facilities.
Print rollers for small and thin materials
Outside the material width the printhead rubs against the print rollers. By using small print rollers feeding errors and wear on print head and print roller due to rubbing are avoided. Three different standard widths are available from stock.
![Cab SQUIX 4 M Printer [300dpi, Ethernet, WiFi] 5977010](https://www.barcodefactory.com/images/product/large/157512.jpg "Cab SQUIX 4 M Printer [300dpi, Ethernet, WiFi]")
![Cab CAB A4 M TT Printer [300dpi, Ethernet, Internal Rewind] 5954552](https://www.barcodefactory.com/images/product/large/51572.jpg)
Spec. Sheet
