Tach-It Mini-Con S Label Applicator
| Applicator Style | Stationery |
| Part Type | Applicator |
| Applicator Type | Automatic |
Product Highlights
Tach-It Mini-Con-S, Label Size: Minimum - 3/8 inch x 5/8 inch, Maximum - 5 inch x 11 inch, Label Roll Diameter: 11 1/2 inch, Speed: 59 ft per minute, Core Size: 3 inch
*This product requires shipment by truck. Please contact us for shipping options.
For New Label Applications BarcodeFactory will provide a free test of your label applied to your product, and provide a video and report of the results. This testing is recommended on all new applications of print to apply to ensure success of your project.
Spec. Sheet
Tach-It Mini-Con S Label Applicator
Realizing a need in the market for a machine between a semi-automatic label dispenser and a full inline labeling system, Tach-It created a table top unit that will feed product on a conveyor through a wipe on label applicator and apply a label precisely on the desired location on the side of a product each time. The Mini-Con-S requires no special operator training or tools for label or product changeovers, has a touch sensitive display screen where all settings are made and viewed, uses only non-contact sensors for product and labels, can apply 1 label or 1 and 2 labels (must be alternating on the web), has a product and target counter, a 10 inch wide high friction conveyor making it perfect for most applications, extra large roll capacity, and the reliability of stepper motors for consistent label placement. To use, an operator simply puts the items to be labeled at one end of the conveyor and it travels along the label head where the label is applied and exits at the other end of the conveyor. If you have a pre-existing conveyor, the Tach-It Mini-Con-S can be purchased with an adjustable height stand on casters that can be rolled right to and set up above your existing conveyor.
- Automatic Wipe-On Label Applicator with Integrated Conveyor.
- Applies the label to the side surface of the product.
- Has built in 10 inch wide by 39 1/2 inch long adjustable speed high friction conveyor.
- Touch Panel controls include target counter and ability to apply 1 label or 2 labels (alternating on the label web).
- Dwell setting in control panel for exact label placement on the package.
- Stepper motor reliability.
- Non-contact technologically advanced controls and label sensors.
- Can be integrated into existing conveyor systems or installed over existing conveyors using an optional stand.
- Small table top design and fully portable.
- No special operator training or tools needed.
- Easy to use and setup.
- Other configurations and models available.
Specifications
- Machine: Length - 40 inch, Width - 32 inch, Height - 26 inch
- Weight: 80 Lbs(Approximate)
- Label Size: Minimum - 3/8 inch x 5/8 inch, Maximum - 5 inch x 11 inch
- Label Roll Diameter: 11 1/2 inchSpeed: 59 ft per minute
- Power: 110 Volt / 220 Volt Dip Switch Controlled
- Core Size: 3 inch