Tach-It SL-1 Tape Dispenser
Product Highlights
Tach-It SL-1, Manual Definite Length Tape Dispenser, Tape Width: Minimum - 1/4" Maximum - 1", Tape Length: Minimum 3/8" Maximum 4", Core Size: 1 Inch & 3 Inch, Maximum Tape Roll Diameter: 5 1/2 Inch, 6 Units Per Case, Priced Per Case
Call for availability of less than full case with purchase of additional Tach-It products.
Spec. Sheet
Tach-It SL-1 Manual Tape Dispensers
This small, manual, bench top definite length tape dispenser accepts most tapes up to 1 inch wide with a maximum roll diameter of 5½ inch. A simple push on the smooth action lever will deliver up to 4 inch piece of tape. Longer lengths of tape can be achieved by multiple pushes of the lever. To change tape lengths, just loosen the thumb screw holding the lever, move the lever to the desired position, and retighten the thumb screw. Cutting of the tape is done as the operator removes the tape from the machine.
- Manual definite length tape dispenser.
- Perfect for retail, gift wrapping, photography and graphics arts, office, shipping room, assembly, wire harnessing, and many other applications.
- Simply pull the handle and the desired length of tape is dispensed. To cut the tape, pull the tape up against the blade.
- Works with most types of non-reinforced tapes up to 1 inch wide.
- Can dispense up to 4 inches of tape per pull of the handle.
- Uses tapes on a 1 inch or 3 inch core.
- Easy to adjust for tape length using a thumb screw, no tools required.
- Small table top design and weighted base.
Specifications
- Min. and Max Tape Width: Min – ¼” Max – 1”
- Min. and Max Tape Length: Min 3/8” and Max 4”
- Machine: Length - 7 1/2 inch, Width - 4 inch, Height - 4 1/2 inch
- Weight: 3 3/4 Lbs
- Core Size: 1 inch and 3 inch
- Tape Width: Maximum: 1 inch
- Maximum Tape Roll Diameter: 5 1/2 inch